|
| |
|
|
Optimisation of a die casting part production.
Vencálek, Jaroslav ; Janský, Milan (referee) ; Píška, Miroslav (advisor)
The project aim is an optimalization of production of pressure die casting, which serves as a one part of handle in office furniture area. The main emphasis was for mass finishing operation, which serves for rounding of very sharp part edges after die casting operation. A few tests of single mass finishing parameter was carried out and as result was a few partial recommendations for an increasing of production efficiency and improving of manufacturing process, namely an adjustment of separation cycle, proposal of optimum amount of pieces in each single batch and an innovation of chips type and dimensions. The project includes a proposal of a new and more efficiency layout of pieces on the transport pallet.
|
|
|
Suggestion of tumbling machine's construction
Coufal, Martin ; Pavlík, Jan (referee) ; Synek, Miloš (advisor)
The thesis is in the first part focuses on the description of the technology and tumbling overview of the applications in which it is possible to use this technology. This topic is the description tumbling wet using ceramic beads. In the third part of this work is performed a brief overview of the types of tumbling machines. The following is a list of their own design variant tumbling machine with a choice of optimal design variants. Then follows the design of the tumbling machines, followed by an overview of the calculations. In the last part of this work are the technical parameters of the designed tools, including a description of its operation and maintenance.
|
|
|
Analysis of machining finishing methods
Urban, Martin ; Chladil, Josef (referee) ; Osička, Karel (advisor)
This diploma thesis deals with the analysis of finishing machining methods. The work describes the technologies of grinding, honing, lapping, polishing, tumbling and superfinishing. Furthermore, the residual surface tension after the superfinishing method is analyzed and two possible methods of its measurement are described. An experiment was also performed in which the finishing processes for the bearing spherical roller for axial spherical roller bearing 29434EJ-3, the bearing spherical roller for double row spherical roller bearing 23164CJ-3 and the inner bearing ring for double row spherical roller bearing 22224EKJ N7-2 were described. Six surface roughness measurements were then performed on the surfaces of these components. For the 23164CJ-3 barrel, the mean arithmetic deviation Ra of the profile ranged between 0.59 and 0.70 µm, for the 29434EJ-3 barrel, the Ra value ranged between 0.26 and 0.31 µm, and for the 22224EKJ N7-2 inner bearing ring, between 0.22 to 0.28 m.
|
|
|
Cutting tool preparation before coating
Musil, Michal ; Novák, Zdeněk (referee) ; Humár, Anton (advisor)
This bachelor thesis summarizes importance and advantages of surface preparation before coating process. Next part of this work analyzes an influ-ence of surface preparation before coating process on tool geometry, tool life and cutting performance. Experimental part brings a comparison between mi-cro-finishing by mix of SiC particles and walnut shells and ion cleaning tech-nology that by the help of Ti or Ar ionts. The 6 mm twist drill made from high speed steel has been chosen as the sample for experimental works. There are describe the advantages of preparation of tool cutting edges before coating, especially the micro-finishing and ion cleaning, and their positive effects on geometry and performance of tool at the end of the work.
|
|
|
Suggestion of tumbling machine's construction
Matula, Petr ; Bilík, Martin (referee) ; Synek, Miloš (advisor)
The master´s thesis deals with a suggestion of vibratory tumbling machine´s construction for tumbling of brass cartridges. The thesis contains theoretical part which describes the principle of tumbling and its possibility of using, further characterizes various types of tumbling machines and their parts. Practical part of thesis includes functional calculations of vibratory tumbling machines, draft of power, compression springs bearing tumbling container and control calculation of these springs. Complete tumbling machine is created in a 3D modeling program. Drawing documentation which includes individual drawings of assemblies, secondary assemblies and their particular parts according to task is enclosed.
|
|
|
Modern cutting finishing methods and their use
Vičar, David ; Polzer, Aleš (referee) ; Píška, Miroslav (advisor)
This thesis deals with a summary of today's methods of finish machining and their inclusion in modern engineering production. It primarily focuses on technological characteristics of some basic methods - conventional and also unconventional. Furthermore, the thesis deals with machinery and tools used in these technologies, the advantages and disadvantages of various methods and their achieved parameters.
|
|
|
Analysis of machining finishing methods
Urban, Martin ; Chladil, Josef (referee) ; Osička, Karel (advisor)
This diploma thesis deals with the analysis of finishing machining methods. The work describes the technologies of grinding, honing, lapping, polishing, tumbling and superfinishing. Furthermore, the residual surface tension after the superfinishing method is analyzed and two possible methods of its measurement are described. An experiment was also performed in which the finishing processes for the bearing spherical roller for axial spherical roller bearing 29434EJ-3, the bearing spherical roller for double row spherical roller bearing 23164CJ-3 and the inner bearing ring for double row spherical roller bearing 22224EKJ N7-2 were described. Six surface roughness measurements were then performed on the surfaces of these components. For the 23164CJ-3 barrel, the mean arithmetic deviation Ra of the profile ranged between 0.59 and 0.70 µm, for the 29434EJ-3 barrel, the Ra value ranged between 0.26 and 0.31 µm, and for the 22224EKJ N7-2 inner bearing ring, between 0.22 to 0.28 m.
|
|
| |
|
|
Suggestion of tumbling machine's construction
Matula, Petr ; Bilík, Martin (referee) ; Synek, Miloš (advisor)
The master´s thesis deals with a suggestion of vibratory tumbling machine´s construction for tumbling of brass cartridges. The thesis contains theoretical part which describes the principle of tumbling and its possibility of using, further characterizes various types of tumbling machines and their parts. Practical part of thesis includes functional calculations of vibratory tumbling machines, draft of power, compression springs bearing tumbling container and control calculation of these springs. Complete tumbling machine is created in a 3D modeling program. Drawing documentation which includes individual drawings of assemblies, secondary assemblies and their particular parts according to task is enclosed.
|
guest ::
